 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-7 AlGaAs Red QTLP670C-3 Yellow QTLP670C-B Blue QTLP670C-4 Green QTLP670C-W White PACKAGE DIMENSIONS 0.130 (3.3) 0.114 (2.9) O0.094 [O2.4] 0.118 (3.0) 0.102 (2.6) 0.091 (2.3) 0.083 (2.1) TOP POLARITY MARK 0.024 (0.6) 0.016 (0.4) 0.083 (2.1) 0.067 (1.7) 0.146 (3.7) 0.130 (3.3) 0.006 (0.15) SIDE 0.032 (0.8) BOTTOM _ _ POLARITY for -2, -3, -4, -9, -B and W for -7 APPLICATIONS * Automotive interior lighting * Status indication for consumer electronics and office equipment NOTE: Dimensions for all drawings are in inches (mm). DESCRIPTION These surface mount LEDs are designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. They are compatible with convective IR and vapor phase reflow soldering. The package size and configuration conform to EIA-535 BAAC standard specification for case size 3528 tantalum capacitor. These LEDs are ideal for backlighting and optical coupling into light pipes. FEATURES * GaN/SIC technology for -B and -W * Wide viewing angle of 120 * Water clear optics * Moisture-proof packaging * Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel (c) 2003 Fairchild Semiconductor Corporation Page 1 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-7 AlGaAs Red QTLP670C-3 Yellow QTLP670C-B Blue QTLP670C-4 Green QTLP670C-W White ABSOLUTE MAXIMUM RATINGS (TA =25C Unless otherwise specified) QTLP670C Parameter Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage (IR = 10 A) Power Dissipation Operating Temperature Storage Temperature Lead Soldering Time Symbol -2 IF IFM VR PD TOPR TSTG TSOL 30 160 5 84 -3 30 160 5 84 -4 30 160 5 84 -7 30 180 5 72 -B 30 100 5 135 -W 30 100 5 135 mA mA V mW C C C Units -40 to +85 -40 to +90 260 for 5 sec ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25C) QTLP670C Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Chromatic Coordinate Spectral Line Half Width (nm) Viewing Angle () P D x,y 21/2 635 630 -- 45 120 585 590 -- 35 120 565 570 -- 30 120 660 645 -- 20 120 430 465 -- 65 120 -- -- x = 0.26 y = 0.28 -- 120 IF = 20mA IF = 20mA IF = 20mA IF = 20mA VF 2.8 2.0 2.8 2.0 2.8 2.1 2.4 1.9 4.5 3.8 4.5 3.8 IF = 20mA IV 5 10 5 10 15 25 25 40 20 30 20 30 IF = 20mA Symbol -2 -3 -4 -7 -B -W Condition (c) 2003 Fairchild Semiconductor Corporation Page 2 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-7 AlGaAs Red TYPICAL PERFORMANCE CURVES Fig. 1 Forward Current vs. Forward Voltage 90 2.0 QTLP670C-3 Yellow QTLP670C-B Blue QTLP670C-4 Green QTLP670C-W White Fig. 2 Relative Luminous Intensity vs. DC Forward Current IF - FORWARD CURRENT (mA) 70 60 50 40 30 20 10 0 1.0 2.0 3.0 4.0 5.0 BLUE & WHITE AlGaAs RED HER GREEN RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 80 1.5 AlGaAs RED YELLOW 1.0 BLUE & WHITE 0.5 HER YELLOW GREEN 0.0 0 5 10 15 20 25 30 VF - FORWARD VOLTAGE (V) IF - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength HER WHITE GREEN YELLOW AlGaAs RED 1.0 RELATIVE INTENSITY 0.5 0 300 350 400 450 BLUE 500 550 600 650 700 750 WAVELENGTH (nm) Fig.4 Radiation Diagram 50 Fig.5 Maximum Forward Current vs. Ambient Temperature IF - FORWARD CURRENT (mA) 40 -20 -30 -40 -50 -60 -70 -80 -90 1.0 -10 0 10 20 30 40 50 60 70 80 90 30 20 10 0 0 20 40 60 80 100 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 REL. LUMINOUS INTENSITY (%) TA - AMBIENT TEMPERATURE (C) (c) 2003 Fairchild Semiconductor Corporation Page 3 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-7 AlGaAs Red QTLP670C-3 Yellow QTLP670C-B Blue QTLP670C-4 Green QTLP670C-W White RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.063 [1.60] 0.095 [2.41] 0.071 [1.80] 2X RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240 C MAX +5 C/s MAX -5 C/s MAX 60 - 120 sec Preheating 120 - 150 C MAX (c) 2003 Fairchild Semiconductor Corporation Page 4 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-7 AlGaAs Red TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 QTLP670C-3 Yellow QTLP670C-B Blue QTLP670C-4 Green QTLP670C-W White 11.0 +0.5 -0.0 5 0. 2.5 O12.75 +0.25 -0.0 Progressive direction 1.75 2.00.05 4.0 O1.55.05 (sprocket) 0.23 3.50.05 2.5 0 0.5 O62.00.5 8.0 O1801 4.0 3.84 3.12 2.24 for -2, -3, -4, -9, -B and -W Polarity Dimensional tolerance is 0.1mm unless otherwise specified Angle: 0.5 Unit: mm Polarity marks are on the sprocket side. (c) 2003 Fairchild Semiconductor Corporation Page 5 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-7 AlGaAs Red TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 QTLP670C-3 Yellow QTLP670C-B Blue QTLP670C-4 Green QTLP670C-W White 11.0 +0.5 -0.0 5 0. 2.5 O12.75 +0.25 -0.0 Progressive direction 1.75 2.00.05 4.0 O1.55.05 (sprocket) 0.23 3.50.05 2.5 0 0.5 O62.00.5 8.0 O1801 4.0 3.84 3.12 2.24 for -7 Polarity Dimensional tolerance is 0.1mm unless otherwise specified Angle: 0.5 Unit: mm Polarity marks are on the opposite sprocket side. (c) 2003 Fairchild Semiconductor Corporation Page 6 of 7 9/3/03 SURFACE MOUNT LED LAMP STANDARD BRIGHT PLCC-2 QTLP670C QTLP670C-2 HER QTLP670C-7 AlGaAs Red QTLP670C-3 Yellow QTLP670C-B Blue QTLP670C-4 Green QTLP670C-W White DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. (c) 2003 Fairchild Semiconductor Corporation Page 7 of 7 9/3/03 |
Price & Availability of QTLP670C-2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |